Santon EV 2008 Spezifikationen

Multipoint 1Installation and User InstructionsInstantaneous Hand WashModels: EV 2008Please read and understand these instructions before starting wor

10 PIPE ENTRY4.9 Plumbing entry can be from the rear (preferred) or from the bottom. The backplate has a cut out position to suit 15mm pipe.Wh

Multipoint 1111 PIPE CONNECTION5.8 The outlet spout can be removed to ease installation.5.9 The handwash has been designed for a 15mm water pipe

125.11 An isolating stopvalve MUST be incorporated to the main water supply to comply with Water Regulations - see Fig. 4. 5.12 Cut all necessa

Multipoint 13 WARNING 6.1 This appliance must be earthed. CAUTION6.2 When working on electrical components ensure they are NOT LIVE. If in any

14 NOTE: The rst operation of the handwash is intended to ensure the heater unit contains water before the appliance is switched on. 7.1 Before

Multipoint 158.1 In the unlikely event of a problem, consult the trouble-shooting chart below.8.2 If you are unable to remedy the problem, CONTAC

169.1 It is recommended that the handwash casing be cleaned using a soft cloth and that the use of abrasive or solvent cleaning uids be avoided.

Multipoint 17This product is guaranteed against faulty materials and manufacture for a period of two years from the date of purchase provided that:1

18Notes:_________________________________________________________

Multipoint 19Notes:_________________________________________________________

2INTRODUCTIONThank you for purchasing a Santon EV2008 Handwash. The Handwash instantaneous water heater is manufactured to the highest standards and h

20 Sales Tel: (08700) 603263

Multipoint 331.1 A pressure relief device (PRD) is designed into the handwash appliance, which complies with European standards. The PRD provid

42.4 DO NOT operate the appliance if: 1. Water ceases to ow during use. 2. Water has entered inside the unit because of an incorrectly tted cover

Multipoint 55 ELECTRICAL2.20 Before tting the appliance, ensure that the consumer unit and any switches are suitable for the additional load.

6 WARNING3.1 The handwash must not be positioned where it will be subjected to freezing conditions. WATER REQUIREMENTS3.2 The installation mu

Multipoint 77 3.4 The appliance must be earthed IMPORTANT - INSTALLATION TO BE DONE BY A COMPETENT INSTALLER3.5 The installation supply cabl

83.11 To obtain full advantage of the power provided by the handwash, use the shortest cable route possible from the consumer unit to the handw

Multipoint 99 IMPORTANT - INSTALLATION TO BE DONE BY A COMPETENT INSTALLER4.1 The appliance must be mounted on a at surface, which covers th